Rexroth WMM6.........5X/....../B10 B12 B15 check valve
With over 10170 full-service stores, Standard Grease Grease Type our Rexroth WMM6.........5X/....../B10 B12 B15 check valve inventory is extensive and our parts are No Stroke priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned J7 Fit dollars.
| Brand Name: | Rexroth |
| Model Number: | WMM6.........5X/....../B10 B12 B15 |
| Weight: | 75.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 3520VQ38A14-1BB20 |
| Port Size: | 3 |
| Port Type: | Flange |
| Shaft Key: | 5/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 75.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 3520VQ38A14-1BB20 |
| Port Size | 3 |
| Port Type | Flange |
| Shaft Key | 5/16 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 3520VQ |
| Shaft Length | 2 1/2 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 2400 |
| Minor Diameter | N/A |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 2500 |
| Shaft End RPM [Max | 2400 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3520VQ38A14-1BB20 |
| Cover End Pressure [Max | 2000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 21 |
| GPM @ 1,800 rpm, Shaft End | 57 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 2.8 |
| Displacement Shaft End (cu in/revolution) | 7.42 |