Rexroth DBW10B1-5X/200-6EG24N9K4 PRESSURE RELIEF VALVE
With over 10170 KAYDON Manufacturer Name full-service stores, our 0.0 Inventory Rexroth DBW10B1-5X/200-6EG24N9K4 PRESSURE RELIEF VALVE inventory is N/A Minimum Buy Quantity extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Rexroth |
| Model Number: | DBW10B1-5X/200-6EG24N9K4 |
| Weight: | 45.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | 2520VQ21A5-1DD20 |
| Port Size: | 2.5 |
| Port Type: | Flange |
| Shaft Key: | 3/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | 2520VQ21A5-1DD20 |
| Port Size | 2.5 |
| Port Type | Flange |
| Shaft Key | 3/16 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 0.875 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 2520VQ |
| Shaft Length | 1 15/16 in |
| Configuration | Double |
| Seal Material | Buna-N |
| Max. RPM [Max | 2500 |
| Minor Diameter | N/A |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 2700 |
| Shaft End RPM [Max | 2500 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520VQ21A5-1DD20 |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 7.5 |
| GPM @ 1,800 rpm, Shaft End | 31.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Pressure Port Size, Shaft End | 1 in Flange |
| Displacement Cover End (cu in/revolution) | 1.1 |
| Displacement Shaft End (cu in/revolution) | 4.1 |