Danfoss Shut-off valves 148B4610 STC 50 A ANG SHUT-OFF VALVE CAP
Danfoss Shut-off valves are a few brands you will BS 330 7P62U Bearing number find in our inventory. 40,5 kN Basic dynamic load rating (C) Find 1,1 mm r1 min. Danfoss Shut-off valves 148B4610 STC 50 A ANG SHUT-OFF VALVE CAP to see what's in stock!
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4610 STC 50 A |
| Weight: |
76.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
3525V35A17-11CC22R |
| Port Size: |
3 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
76.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
3525V35A17-11CC22R |
| Port Size |
3 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.375 in |
| Shaft Type |
14 Tooth Splined |
| Pump Series |
3525V |
| Shaft Length |
2 5/16 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
1800 |
| Minor Diameter |
1.055 in |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
1800 |
| Shaft End RPM [Max |
1800 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.25 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
1.06 in |
| Minor Diameter [Min |
1.05 in |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525V35A17-11CC22R |
| Cover End Pressure [Max |
2500 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| GPM @ 1,800 rpm, Shaft End |
52.5 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
1 in Code 61 |
| Pressure Port Size, Shaft End |
1 1/4 in Code 61 |
| Displacement Cover End (cu in/revolution) |
3.4 |
| Displacement Shaft End (cu in/revolution) |
6.8 |