Rexroth A10VSO18DG/31R-PPA12N00 Piston Pump
Can't find what you're looking for 43.7 mm B1 Rexroth A10VSO18DG/31R-PPA12N00 Piston Pump ? Our expert Rexroth Piston Pump Representatives be in contact with 11.5 Nm Recommended tightening torque for set screw you 11 mm S shortly!
What is A10VSO18DG/31R-PPA12N00 bearing cross reference？
| Brand Name: |
Rexroth |
| Model Number: |
A10VSO18DG/31R-PPA12N00 |
| Weight: |
45.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
2520VQ12A5-1AA20 |
| Port Size: |
2.5 |
| Port Type: |
Flange |
| Shaft Key: |
3/16 in |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
2520VQ12A5-1AA20 |
| Port Size |
2.5 |
| Port Type |
Flange |
| Shaft Key |
3/16 in |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
0.875 in |
| Shaft Type |
Straight w/ Key |
| Pump Series |
2520VQ |
| Shaft Length |
1 15/16 in |
| Configuration |
Double |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2700 |
| Minor Diameter |
N/A |
| Mounting Flange |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
N/A |
| Cover End RPM [Max |
2700 |
| Shaft End RPM [Max |
2700 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
N/A |
| Major Diameter [Min |
N/A |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520VQ12A5-1AA20 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
7.5 |
| GPM @ 1,800 rpm, Shaft End |
18 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |
| Displacement Shaft End (cu in/revolution) |
2.5 |