Danfoss Shut-off valves 148B4636 STC 80 A STR SHUT-OFF VALVE CAP
With over 10170 full-service 4x7x2.5 stores, our Danfoss Shut-off valves 148B4636 STC 80 A STR SHUT-OFF VALVE CAP inventory is extensive 4x7x2.5 Size (mm) and our parts 0,269 kN Basic dynamic load rating (C) are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4636 STC 80 A |
| Weight: |
101.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
4525VQ60A17-11BB20 |
| Port Size: |
3 1/2 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
101.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
4525VQ60A17-11BB20 |
| Port Size |
3 1/2 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| Pump Series |
4525VQ |
| Shaft Length |
1.9375 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2200 |
| Minor Diameter |
1.04 in |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
2200 |
| Shaft End RPM [Max |
2200 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Manufacturer Part No. |
4525VQ60A17-11BB20 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| GPM @ 1,800 rpm, Shaft End |
90 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
3.37 |
| Displacement Shaft End (cu in/revolution) |
11.8 |